Zi-Hs16E - Zipper Maschinen ZI-HS16E Manuel D'utilisation

14 ASSEMBLY
14.1

ZI-HS16E

ZIPPER MASCHINEN GmbH
ZI-HS16E / ZI-HS22EZ / ZI-HS30Z / ZI-HS30EZ
www.Zipper-Maschinen.at
A. Attaching the wheel shaft: Attach the wheel shaft
with U-bolts and lock nuts to the splitter.
B. Mounting the wheels: Place a washer onto the
axle, then a wheel followed by another washer, and
secure with a cotter pin. Repeat procedure for the
other side.
C. Expanding the wedge ram:
stand against the wedge, lower both control handles
to expand wedge ram (1). Insert the L pins to
secure the cylinder to the splitter (2). Lock the L
pins into the spring tabs (3,4).
ASSEMBLY
Keeping the support
32