Bushnell EQUINOX Z Mode D'emploi page 8

• uSING tHE DIGItaL ZooM
Press the "+" button (B) to zoom in. Press the "-" button (B) to zoom out. Hold the button down to zoom in/out rapidly. The Digital
Zoom icon at the lower left corner of the display will indicate the magnification factor, from 1.0x to 3.0x (in 0.1x increments).
• SELEctING paL or NtSc VIDEo output
The Video Output jack (F) is set to NTSC format (30fps TV standard in the USA, Canada, Mexico, etc.) by default. To select PAL
video output (25fps) format as used in other countries, connect the unit to your video device first, then hold both the IR
button (C) and Image Brightness (E) buttons down for 5 seconds while viewing the display through the eyepiece. When the
display changes to "PAL", release the buttons. To switch back to NTSC video output format, hold both buttons for 5 seconds until
the display indicates "NTSC", then release the buttons. Note: The "Auto Off" feature is disabled when using the Video Output jack.
8