Festo BWL-HSP Serie Guide Rapide page 21

Fitting the electric components
For scanning the position of the cylinder use a proximity
switch type SME/SMT−8−... .
1. Push the proximity switch into the sensor groove of the
cylinder 9.
2. Fasten the proximity switch in the end position.
3. Fasten the cables outside the area of movement.
S Clamp the cables in the groove of the side plates
S Secure the cables with the aid of the cover profile
S Pass the cables back through the hole in the
Festo BWL−/BWR−HSP−... 0311NH English
8
and the sub−base of the HSP−... .
of the installation kit
sub−base 8.
type MKRP−... .
9
21