Festo BWL-HSP Serie Guide Rapide page 15

1 Important user
When the double−acting actuator cylinder type
BWL−/BWR−HSP−... retracts, it pulls the vertical guide rail
of the handling module type HSP−... out of the left−hand
(A) or right−hand end position upwards into the waiting
position (B).
When the actuator cylinder moves out, the HSP−... can
swing out of the waiting position (B) back into the starting
position (A) or the other end position (C). The actuator
cylinder type BWL−/BWR−HSP−... has been designed for
pulling the vertical guide rail of the handling module type
HSP−... out of the work range.
z
Conditions of use
Observe the specified limits (e.g. pressures, forces,
S
temperatures). Observe the ambient conditions at
your location.
Pressurize your system slowly. Uncontrolled move
S
ments will not then occur.
Use the product in its original state without undertak
S
ing any modifications.
Festo BWL−/BWR−HSP−... 0311NH English
instructionsEnglish
BWL−...
y
(B)
(A)
BWR−...
( )
C
15