Festo BWL-HSP Serie Guide Rapide page 18

Check in the end position the distance between cross
S
link 3 of the HSP−... and disc of the BWL−/BWR−HSP−...
4.
With stop (distance < 1 mm):
1. Check the fastening of the BWL−/BWR−HSP−...
2. If necessary, loosen the hexagon nuts 5 and 6 for
readjustment.
3. Set a distance of 1..3 mm.
4. Tighten the locking nut 5 (see table).
Type
BWL−/BWR−HSP−12
BWL−/BWR−HSP−16
BWL−/BWR−HSP−25
18
Tightening torque 5
M4 1.0 Nm
M6 4.0 Nm
M8 4.0 Nm
Festo BWL−/BWR−HSP−... 0311NH English