20. Drop the decorative arm covers and
canopy covers. Insert the power wire
up through the arm and into the
junction box. Fig. 27.
21. Make the wire connections and
install the outlet box cover with (2)
3.9 x 6 mm Flat Head Screws and
(2) 3.9 mm lock washers. Fig. 28.
22. Install the canopy covers with (4)
M4x16 Brass Decorative Screws.
Fig. 29.
23. Slide the lower decorative arm
down onto the top of the hood and
secure with (2) 3.9 x 6 mm Flat Head
Screws per arm. Fig. 30.
Go to "INSTALL GLASS PANELS" .
3.9 x 6 MM
FLAT HEAD
SCREWS
FIG. 30
- 17 -
FIG. 27
FIG. 28
M4X16
DECORATIVE
BRASS SCREW
FIG. 29