Table Des Matières; Head Screws. Fig. 21 - Best IC35I90B Mode D'emploi

FOR AEIC35SB KIT NON- DUCTED
FLUE VERSION
13. Assemble non-duct plenum to duct
cover rails with (4) 3.9 x 6 mm pan
head screws. Fig. 21.
14. Slide the flue cover rails on the
telescopic arms and attach to arm
brackets using (4) 3.9 x 9 mm flat

head screws. Fig. 21.

15. Install plastic duct connector into
non-duct plenum, then install the 6"
to 5" reducer and seal with duct tape.
Fig. 22.
16. Install 5"x 12.5" expandable duct and
seal with duct tape. Fig. 22.
17. Temporarily install upper flue covers
with (4) 3.9 x 9 mm pan head screws
(you will need to remove it when
making electrical connections).
Fig. 23.
Skip to Step 24.
2.9 X 9.5 MM PAN
HEAD SCREWS (4)
3.9 X 9 MM FLAT
HEAD SCREWS (4)
3.9 X 6 MM PAN
HEAD SCREWS (4)
DUCT CONNECTOR
FIG. 23
- 15 -
5" EXPANDABLE DUCT
6" TO 5" REDUCER
FIG. 21
FIG. 22