System Group; Learn Mode; Trigger Bypass; Volume Mode - Yamaha DTXPRESS II Mode D'emploi

2. SYSTEM Group

This sub-mode contains settings that relate to the overall
DTXPRESS II system. The group is divided into the following 6
pages.

2-1. Learn Mode ..................................................... 29

2-2. Trigger Bypass ................................................. 29

2-3. Volume Mode .................................................. 29

2-4. Jump to Recent Page ...................................... 29

2-5. Hi-Hat Offset .................................................... 30

2-6. Factory Set ...................................................... 30

2-1. Learn Mode

This function allows selection of the pad (trigger input) you want
to edit by hitting the pad when you are editing in the Trigger Setup
Edit mode or Drum Kit Edit mode. Also, MIDI key on input from
the MIDI IN/TO HOST jack can be used to appoint the MIDI note
number in the Utility mode's User Map Setting.
UT SYSTEM
LearnMode=allwys
q LearnMode
allwys:Always appoints according to pad/key on input.
shift: Hitting a pad or key on input while holding the [SHIFT]
button selects the pad or note.
none:
Can't appoint according to pad/key on input.

2-2. Trigger Bypass

This function prohibits reception of pad signals from pads (the hi-
hat controller too) connected to the DTXPRESS II. You will not
be able to produce voices or transmit MIDI data. The sequencer
and tone generator will function normally.
Use this function when you are setting your drum kit with
trigger pickup devices, or when you do not want to acci-
dentally make a sound during song playback.
UT SYSTEM
Trig Bypass=ioff
q Trig Bypass
off: Bypasses the trigger (does not receive).
on: The trigger functions normally (receives trigger).
Sets the ACCOMP. VOL knob and CLICK VOL knob on the front
panel.
q VolMode (Volume Mode)
• practice : When set to the practice mode.
• live: When set to the Live mode.
q
This function lets you display the page last selected in the previ-
ous edit of the Trigger Setup Edit mode and Drum Kit Edit mode.
q JumpRecentPg (Jump to Recent Page)
on: The display page last selected in the previous edit will ap-
q
off: The main page of each mode will be displayed.

2-3. Volume Mode

UT SYSTEM
VolMode=practice
[ACCOMP. VOL]
Using the [ACCOMP. VOL] knob as is will adjust the volume of
the song accompaniment.
Holding the [SHIFT] button while turning the knob will adjust the
snare drum volume.
[CLICK VOL]
Using the [CLICK VOL] knob as is will adjust the volume of the
metronome click.
Holding the [SHIFT] button while turning the knob will adjust the
bass drum volume.
[ACCOMP. VOL]
Using the [ACCOMP. VOL] knob as is will adjust the snare drum
volume.
Holding the [SHIFT] button while turning the knob will adjust the
cymbal volume.
[CLICK VOL]
Using the CLICK VOL knob as is will adjust the bass drum vol-
ume.
Holding the [SHIFT] button while turning the knob will adjust the
volume of the drum's other drum instruments.

2-4. Jump to Recent Page

UT SYSTEM
JumpRecentPg=off
pear when you enter the Trigger Setup Edit, Drum Kit Edit,
Utility and Song Edit modes.
Utility Mode
q
q
29