Safety Instructions - Autosen IO-Link AL007 Notice D'utilisation

All manuals and user guides at all-guides.com
> Reaction, result
[...] Designation of keys, buttons or indications
→ Cross-reference
Information
Supplementary note�
Important note
Non-compliance may result in malfunction or interference�

2 Safety instructions

• Read this document before setting up the product and keep it during the entire
service life�
• The product must be suitable for the corresponding applications and environ-
mental conditions without any restrictions�
• Only use the product for its intended purpose (→ 3 Functions and features).
• If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur�
• The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator�
• Installation, electrical connection, set-up, operation and maintenance of the
product must be carried out by qualified personnel authorised by the machine
operator�
• Protect units and cables against damage�
According to cULus
Caution - Use of controls or adjustments or procedures other than those
specified herein may result in hazardous radiation exposure�
Visible laser light; LASER CLASS 1�
EN/IEC 60825-1 : 2007 and EN/IEC 60825-1 : 2014
Complies with 21 CFR 1040 except for deviations
pursuant to Laser Notice No� 50, dated June 2007�
UK
15