AirSep Focus Manuel page 217

Focus™
How to Respond to Focus's Audible Alarm and
Indicator Lights
Status Audible Alarm
Indicator Brief, continuous at
start–up
Indicator No
Indicator No
Battery No
Indicator
Alarm Intermittent:
Beep
Alarm Intermittent:
Beep, beep
Alarm Continuous:
Beep
®
AirSep Corporation
MN172-1 rev. A - 02/13
Light
(Green) and Focus has been
(Red) alternate; turned on.
then (Green)
continuous light
(Green) Focus is delivering
flashes;on each oxygen as a pulse
breath flow.
(Amber) Inspection and/or
continuous light Service required.
25% (Green) Battery charge is
light; flashes low.
(Amber) alarm; Warning: Battery
intermittent light voltage
approaching too
low a level to
continue operating
Focus.
(Amber) alarm; Battery shutdown:
intermittent light Battery voltage is
too low to operate
Focus.
(Amber) alarm; No breath detected
continuous light by the unit for a
predetermined
time period.
Indicates
You may begin to
operate your Focus
unit.
Continue using Focus
normally.
Return unit to
Equipment Provider
for inspection and/or
service.
Connect the Focus
unit into a DC outlet
or an AC outlet
immediately. Charge
battery.
Connect the Focus
unit into a DC outlet
or an AC outlet
immediately.
Charge battery.
Connect the Focus
unit into a DC outlet
or an AC outlet
immediately.
Charge battery.
Check the cannula
connection. Ensure
that you are breathing
through your nose.
If the alarm persists,
contact your
Equipment Provider.
EN
Action
EN-29