Explanation Of Symbols; Safety; Intended Use; Safety Instructions - Craft Meyer 10002558 Mode D'emploi

2.2 | Explanation of symbols

The following symbols and signal words are used in these instructions.
WARNING!
CAUTION!
IMPORTANT!

3 | Safety

3.1 | Intended use

The brake bleed valve with hose connector prevents air from entering into the
system when you are replacing the hydraulic fluid for your vehicle's brakes and
clutch hydraulics. It also makes the job considerably easier. When using this
check valve, it is no longer necessary, as is otherwise the case, to close the bleed
screw on the hydraulic cylinder after pumping three times with the hand or foot
lever in order to reliably prevent air from entering into the system - the fluid can
be pumped through without stopping.

3.2 | Safety instructions

WARNING!
Risk of accident!
• Once all work on the braking system is complete, carefully
check that the braking system is working before restarting
the vehicle.
12
This symbol/signal word indicates a hazard with a
medium risk level which, if not avoided, may result
in death or serious injury.
This symbol/signal word indicates a hazard with
a low risk level which, if not avoided, may result in
minor or moderate injury.
This signal word warns of possible material
damage.
This symbol gives you useful additional information
about assembly or usage.
This symbol indicates that the packaging and the
product itself can be recycled.