Craft Meyer 10002558 Mode D'emploi page 13

• DOT 5 class brake fluid (silicone-based) lubricates very
strongly and should therefore not be allowed to come into
contact with brake disks, brake linings or tyres. Remove
any DOT 5 brake fluid immediately with brake cleaner as
necessary.
• Never mix DOT 5 brake fluid with brake fluids of class DOT 3
or DOT 4.
WARNING!
Danger for children and persons with reduced physical,
sensory or mental abilities (e.g. partially disabled persons,
elderly persons with reduced physical and mental abilities)
or lack of experience and knowledge (e.g. older children)!
• The packaging film must be kept away from children, as there
is a risk of suffocation.
CAUTION!
Risk of poisoning!
• Brake fluid can be found in the hydraulic braking system.
Class DOT 3, 4 and 5.1 brake fluids corrode paintwork and are
toxic. Therefore they must never be stored in drinking bottles.
• If brake fluid is ingested accidentally, seek medical attention
immediately.
• In case of contact with the eyes, flush immediately with
copious amounts of water.
IMPORTANT!
Risk of damage!
• Always wipe off any brake fluid from painted vehicle parts
immediately with copious amounts of clear water.
13