Bosch Rexroth 1 827 414 297 Mode D'emploi page 21

Bosch Rexroth
DIN EN 50 014
DIN EN 50 028
IEC 60079-18
DIN EN 50 281-1-1
DIN EN 60529
DIN EN 61000-6-2
DIN EN 61000-6-4
DIN VDE 0580
94/9/EC guideline
1) A note on electromagnetic compatibility (interference):
There are currently no regulations that define cable-related interference for
devices that are operated with direct current. Modern power supply units
suppress the physical cutoff disruption of the solenoid coil. A rectifier is
installed between the coil and cable in devices that operate with alternating
current. There is no interference here. The cable for direct current devices
must have a protective coating.
Bosch Rexroth AG
Robert Bosch Str. 2
71701 Schwieberdingen, Germany
Schwieberdingen, Germany
July 14, 2003, p.p. A. Gerhard, Pneumatics Development Manager
Electrical apparatus for potentially explosive atmospheres
(general requirements)
Electrical apparatus for potentially explosive atmospheres
(encapsulation m)
Electrical apparatus for potentially explosive atmospheres
(encapsulation m)
Electrical apparatus for use in the presence of
combustible dust
Degrees of protection provided by enclosures (IP code)
Electromagnetic compatibility (EMC), generic standards;
interference for industrial environments (supplemented
with additional technical measures for circuits)1)
Electromagnetic compatibility (EMC), generic standards,
immunity for industrial environments
General specifications for electromagnetic devices and
components
Equipment and protection systems for use in areas
subject to explosions
Declaration of conformity
21