Removal From Service, Demounting, Disassembly; Storage; Disposal - Wezag WDT UP 14 Z Mode D'emploi

11

Removal from Service, Demounting, Disassembly,

DANGER
Due to the risk of hand or finger injury, never try to reach into the machine before having
+
assured that the machine is disconnected from the air supply. Disconnect the air supply
before changing the safety guard and the dies.
CAUTION
Before starting maintenance, disassembly or repair work, the crimping machine must be
+
disconnected from air supply.
Maintenance work may be performed only by authorized and properly trained staff. The
+
housing and the covers in particular may only be removed by specially trained staff.
When working with the pneumatic Crimp Machine UP 14 Z, do not wear loose clothing,
+
jewellery or long, loose hair that can get caught in the pneumatic Crimp Machine UP 14 Z.
Only one person is allowed to work on or with the machine at a time!
+
Work with caution.
+
The machine can only be depressurized by disconnecting the machine from the main air
+
supply.
12

Storage

Store the machine in the original carton at room temperature.
13

Disposal

For the disposal of the pneumatic Crimp Machine UP 14 Z, send it back to WDT ToolTech.
BDA UP 14 Z – 03/15 – REV. 0 Page 43 / 71