Responsibilities; Designed Use; Predictable Misuse - Wezag WDT UP 14 Z Mode D'emploi

2.3

Responsibilities

The pneumatic Crimp Machine UP 14 Z may only be operated by suitably trained and
authorized personnel. The user must clearly define and observe the responsibilities of the
personnel for operation, set-up, maintenance and service. It is particularly important to define
who is responsible for work on the pneumatic equipment. Such work should only be carried
out by specially trained staff.
Should the user make any changes to the machine without consulting the manufacturers or
the suppliers, the latter will not be liable for any damage that may result.
The user of the pneumatic Crimp Machine UP 14 Z is responsible for making sure that all
persons involved in any way, either in the installation or in maintenance of the machine, have
been thoroughly trained on the system using the this operating Instruction.
The user is also responsible for the training of operators and the instruction must include the
following aspects:
Purpose of the machine
+
Hazard zones
+
Safety rules and regulations
+
Functionality of the various components of the machine
+
Proper operation of the machine
+
To assure full familiarization with the system, the training must be conducted in the native
language of the operators involved.
Staff qualifications required in conjunction with the use of the pneumatic Crimp
Machine UP 14 Z:
Installation
Set-up
Instruction
Operation
Maintenance
Service
The safety instructions, warnings and precautions contained in the individual chapters must be
strictly observed by all users and operators.
2.4

Designed Use

Realization of crimp connections up to a cable Ø of 50 mm² depending on the terminal
+
design.
The pneumatic Crimp Machine UP 14 Z is designed for the use of the WEZAG dies. The
pneumatic Crimp Machine UP 14 Z should only be used with the dies specified by WEZAG. It
is only allowed to use the pneumatic Crimp Machine UP 14 Z together with the WEZAG die
sets for the preparation of crimp connections!
2.5

Predictable Misuse

Every application which is not mentioned in chapter 2.4 „Designed Use".
+
BDA UP 14 Z – 03/15 – REV. 0
Technical personnel with language proficiency in either English,
German or French, in addition to the native language of the
operator.
Through qualified personnel trained as indicated above.
Technical personnel with proficiency in English, German or
French.
Page 31 / 71