Maintenance; Maintenance Plan - Wezag WDT UP 14 Z Mode D'emploi

9

Maintenance

DANGER
Due to the risk of hand or finger injury, never try to reach into the machine before having
+
assured that the machine is disconnected from the air supply. Disconnect the air supply
before changing the safety guard and the dies.
CAUTION
The compressed air connection tube must not be longer than 1 m and has to have a
+
coupling connection.
Before starting maintenance, disassembly or repair work, the crimp machine must be
+
disconnected from air supply.
Maintenance work may be performed only by authorized and properly trained staff. The
+
housing and the covers in particular may only be removed by specially trained staff.
When working with the pneumatic Crimp Machine UP 14 Z, do not wear loose clothing,
+
jewellery or long, loose hair that can get caught in the pneumatic Crimp Machine UP 14 Z.
The crimp machine is only allowed to be used when it is in complete functional condition.
+
The crimp machine is only allowed to be used with mounted dies and safety guard.
+
Work with caution.
+
Only one person is allowed to work on or with the machine.
+
Assure free access to the operating elements of the machine, especially the foot pedal.
+
It is only allowed to work with the specified air pressure.
+
9.1

Maintenance Plan

DANGER
Due to the risk of hand or finger injury, never try to reach into the machine before having
+
assured that the machine is disconnected from the air supply. Disconnect the air supply
before changing the safety guard and the dies.
CAUTION
Before starting maintenance, disassembly or repair work, the crimp machine must be
+
disconnected from air supply.
Maintenance work may be performed only by authorized and properly trained staff. The
+
housing and the covers in particular may only be removed by specially trained staff.
When working with the pneumatic Crimp Machine UP 14 Z, do not wear loose clothing,
+
jewellery or long, loose hair that can get caught in the pneumatic Crimp Machine UP 14 Z.
Work with caution.
+
Wear protective gloves and safety glasses during lubrication work. Please pay attention to
+
the safety instructions in the "safety data sheet" of the grease.
Regular maintenance and cleaning of the parts which can be reached without opening the
machine will prolong the life of the machine. Do not use rough materials to clean the machine
such as wire wool. The machine and or machine part should not be cleaned with compressed
air. The crimping machine as well as the machine parts must not be cleaned with hard objects
like scrapers, steel wool or similar. Vacuum heavily soiled parts and wear.
BDA UP 14 Z – 03/15 – REV. 0 Page 41 / 71