GYS FLASH 30.12 PL Mode D'emploi page 8

Translation of the original instructions
SAFETY INSTRUCTIONS
This manual contains safety and operating instructions, to be
followed for your safety. Please read it carefully before using
the device for the first time and keep it for future reference.
This machine should only be used for charging or power
supply operations comprised within the limits indicated on the
machine and in the instructions manual. The operator must
observe the safety precautions. In case of improper or unsafe
use, the manufacturer cannot be held liable.
The device is destined to be used indoors. Must not be
exposed to the rain.
This unit can be used by children aged 8 or over and by
people with reduced physical, sensory or mental capabilities
or lack of experience or knowledge, if they are properly
monitored or if instructions for using the equipment have safely
been read and risks made aware of. Children must not play
with the product. Cleaning and maintenance should not be
performed by an unsupervised child.
Do not use to charge domestic batteries or non rechargeable
batteries.
Do not operate the device with a damaged power supply cord
or a damaged mains plug.
Do not use the device if the charging cable appears to be
damaged or assembled incorrectly in order to avoid any risk
of short circuiting the battery.
Never use on a frozen or damaged battery.
Do not cover the device.
Do not place the device near a fire or subject it to heat or to
longterm temperatures exceeding 50°C
Do not obstruct the machine's air intake, which facilitates air
circulation.
The operating mode of the automatic charger and the
restrictions applicable to its use are explained later in this
manual.
Fire and explosion risks!
A charging battery can emit explosive gases.
• During the charge, the battery must be placed in a well
• Avoid flames and sparks. Do not smoke near the device.
• Protect the battery's electrical contact surfaces against short-
Acid projection hazard !
• Wear safety goggles and protective gloves
8
GYSFLASH 30.12 PL
ventilated area.
circuits.
EN