General Information - VINCENT SA-T7 Manuel D'utilisation

CONNECTION OF THE SOURCE EQUIPMENT
Connect the outputs of the source appliances to the inputs "S1"..."S6" (11) of this preamplifier. You can
connect up to six devices with analogue RCA stereo high level output such as a CD player in order to pro-
vide the audio signals of your input sources to the system. The output sockets on the source equipment are
usually indicated by "LINE OUT", "AUDIO OUT" or "FRONT OUT". You will find information about ways
to connect source equipment in their operating manuals. All six inputs represent electrically equivalent
standard high level inputs with RCA connection. They have an identical function and differ only in name.
SA-T7

General information:

To use a record player you need a so-called phono preamplifier (also called an equaliser preampli-
fier), which is installed in the signal path between the record player and one of the high-level inputs.
Some models of record player already include this preamplifier and can be connected directly. You
will find further information in this appliance's operating manual.
The stereo sound of appliances that use output connectors other than RCA (DIN plugs, jack plugs) can
often also be used with the aid of adaptors.
This device is equipped with a switch (17) that can be used to change the country-specific voltage from
230 V to 110 V.
Please never actuate the switch during operation! The voltage must only be switched by a techni-
cian, since the device fuse must also be replaced after actuation of the switch! Information about
the device fuse can be found on the back of the device.
Unauthorised actuation of the switch will void any warranty claim!
Vincent
30
SWITCHING THE VOLTAGE
RCA connection
LINE OUT
CD player, tuner etc.