General Information - VINCENT SA-T1 Manuel D'utilisation

CONNECTION OF THE SOURCE EQUIPMENT
Connect the outputs of the source appliances to the inputs "S1"..."S6" (10) of this preamplifier. You can
connect up to six devices with analogue RCA stereo high level output such as a CD player in order to pro-
vide the audio signals of your input sources to the system. The output sockets on the source equipment are
usually indicated by "LINE OUT", "AUDIO OUT" or "FRONT OUT". You will find information about ways
to connect source equipment in their operating manuals. All six inputs represent electrically equivalent
standard high level inputs with RCA connection. They have an identical function and differ only in name.
SA-T1

General information:

To use a record player you need a so-called phono preamplifier (also called an equaliser preampli-
fier), which is installed in the signal path between the record player and one of the high-level inputs.
Some models of record player already include this preamplifier and can be connected directly. You
will find further information in this appliance's operating manual.
The stereo sound of appliances that use output connectors other than RCA (DIN plugs, jack plugs) can
often also be used with the aid of adaptors.
CONNECTION OF A RECORDING DEVICE
If you want, you can use the RCA sockets "OUTPUT REC" (11) on the back of the appliance to connect an
analogue stereo recording device (e.g. CD recorder, cassette recorder etc.) or another appliance that is
intended for receiving the unchanged, fixed stereo output level (line level) from the signal source selected
on the amplifier at any given time. The output level is independent from the volume setting. Please note that
while the preamplifier is muted (15) the recording output is switched off.
SA-T1
Connect this signal output to the signal input ("LINE IN", "TAPE IN" or "REC IN") on the recording appli-
ance using RCA cables. Please note that some recording equipment can have a slightly detrimental effect
on the audio signal quality. Some recording devices have rather low input impedance, which can slight-
ly alter the input signal voltage. For maximal music enjoyment we recommend that you connect to the
"REC" terminal only for as long as the recording is actually being made.
Vincent
28
RCA connection
RCA connection
CD player, tuner etc.
LINE OUT
Recording device,
e.g. tape recorder
LINE IN