General Information - VINCENT SA-94 Manuel D'utilisation

CONNECTION OF THE SOURCE EQUIPMENT
Connect the outputs of the source appliances to the inputs "LINE1"..."LINE5" (7) of this preamplifier. The
output sockets on the source equipment are usually indicated by "LINE OUT", "AUDIO OUT" or "FRONT
OUT". You will find information about ways to connect source equipment in their operating manuals.
SA-94

General information:

To use a record player you need a so-called phono preamplifier (also called an equaliser preampli-
fier), which is installed in the signal path between the record player and one of the high-level inputs.
Some models of record player already include this preamplifier and can be connected directly. You
will find further information in this appliance's operating manual.
The stereo sound of appliances that use output connectors other than RCA (DIN plugs, jack plugs) can
often also be used with the aid of adaptors.
You can connect up to five devices with analogue RCA stereo high level output such as a CD player in
order to provide the audio signals of your input sources to the system. All five RCA inputs represent elec-
trically equivalent standard high level inputs with RCA connection. They have an identical function and
differ only in name.
CONNECTION OF THE SOURCE EQUIPMENT
The input "BALANCED" (7) can only be connected with audio devices that own a balanced output con-
nector, too. Leave the input free if none of your audio sources uses this kind of connectors. Sometimes
audio source devices have the option of using either of these connection standards.
SA-94
Vincent
30
WITH RCA OUTPUT
RCA connection
WITH XLR OUTPUT
XLR connection
CD player, tuner etc.
LINE OUT
CD player, tuner etc.
LINE OUT