Initial Startup - Kärcher WD 1 Classic Manuel D'utilisation

4x

Initial startup

Dry vacuum cleaning
Install the non-woven filter bag and
filter bag
1. Release and remove the suction
head.
2. Install the non-woven filter bag and
ensure correct seating.
3. Fully unfold the filter bag.
4. Press the filter bag with the plastic
ring on the device connection with
your fingers until it clicks into place.
5. Fit and lock the suction head.
Wet vacuum cleaning
Install the foam filter
Note
Before vacuuming up wet dirt, you
must first remove the filter bag and
then remove the non-woven filter bag.
1. Release and remove the suction
head.
2. Install the foam filter and ensure cor-
rect seating.
English
a.
b.
b.
9