Descaling; Troubleshooting; Disposing Of Your Appliance - Krups BW730 Manuel

KR_KETTLE_BW730_NAFTA_NC00111276_Mise en page 1 25/05/12 16:40 Page9

6. DESCALING

For best performance, descale regularly. The amount of scale that develops depends on the hardness
of your water and how frequently the kettle is used. Descale regularly, preferably at least once a month,
more often if your water is very hard. Keep in mind that you may have to descale more often than
indicated based on your water.
To descale your kettle or filter:
Always unplug the base and allow the kettle to cool before cleaning.
Use plain white vinegar at room temperature. When descaling the kettle, fill with 2 cups of white vinegar
and leave for one hour without heating.
For the filter, remove the filter from the spout, and soak with 1 cup of white vinegar for one hour in a
small cup or bowl.
Rinse kettle and filter very well with room temperature water multiple times until completely clean.
Repeat if necessary and allow to dry before next use.
The warranty excludes kettles which have stopped working or do not work properly due to
lack of descaling.

7. TROUBLESHOOTING

If the On/Off switch (i) does stay in its On position
- Check that the kettle is well placed on its base.
- If the kettle is hot and contains water, leave the kettle to cool down for a few minutes and turn it on
again.
- If the kettle is hot and does not contain water, leave the kettle to cool down for a few minutes. Fill the
kettle with cold or room water and turn it on again.
The boiling cycle doesn't start and the water windows LED lights remain switched off
- Check that the kettle is well placed on its base.
- Check that the power plug is well connected to a working outlet.
- Check that the On/Off switch (i) is on ON position.
The kettle doesn't stop
- Check that the lid (c) is well closed.
IF YOUR KETTLE HAS FALLEN, IF IT IS LEAKING, OR IF THE POWER CORD, PLUG OR BASE
ARE VISIBLY DAMAGED
Consult the nearest KRUPS After Sales Service Center and the warranty included at the end of these
instructions.
Do not use the kettle. No attempt should be made to disassemble the product or override the safety
devices. If the power cord is damaged, it must be replaced by the manufacturer, a KRUPS After Sales
Service Center.

8. DISPOSING OF YOUR APPLIANCE

Your appliance contains valuable materials which can be recycled. Consult your local waste
collection center for correct disposal procedure and recycling options.
English
9