Publicité
Les langues disponibles
Les langues disponibles
•
To playback all messages, press ! %
2 and press
in segment 3.
•
To playback the leader message, press *
segment 2 and press
•
To playback the header message, press #
segment 2 and press
•
To playback a single event message, press !
segment 2. Enter the number of the message (1 to 15)
in segment 3 and press
•
To playback a kiss off message, press $
segment 2 and press
7.
Press the recording/playback button on the CS535 voice
module to playback the message. See figure !Å 7.
8.
Press the button to stop playback.
9.
Press the button to playback the next message and so on.
Configuring Handshake and Kiss Off
#
Press !
1.
to program the handshake and kiss off digits.
2.
Enter the handshake digit in segment 1 and press
3.
Enter the kiss off digit in segment 2 and press
•
Keys * to ) represent digits 0 to 9.
•
Enter ! * to program the star key as the
handshake/kiss off digit.
•
Enter ! ! to program the hash key as the
handshake/kiss off digit.
•
Enter ! " in to disable kiss off and handshake.
•
Enter ! # to ! % to program any key press as the
handshake/kiss off digit. This is the default.
4.
Press
to return to the device address prompt.
M
APPING EVENTS TO MESSAGES
Each reportable event can be mapped to one voice message.
The control panel has a location for each event. To map a
message to an event, program the number of the voice message
in the relevant location. Table 6 maps events to locations.
1.
Enter programming mode.
Press *
2.
#
to select the control panel device.
3.
Enter the relevant location number and press
4.
Press
to enter segment 3.
5.
Enter the number of the voice message and press
6.
Repeat steps 2 to 5 until you have mapped all reportable
events to a voice message.
<
You can map one message to a number of events. See table
7 for examples of mapping messages.
Event
Open
Close
Partial
Cancel
"B" Alarms
Zone tamper
Zone trouble
Box trouble
Siren tamper
Sensor low battery
in segment
in
in segment 3.
in
in segment 3.
in
.
in
in segment 3.
.
.
#
.
.
Location
69
70
71
72
73
74
76
78
80
82
Event
Sensor missing
Duress
Keypad Auxiliary 1
Keypad Auxiliary 2
Keypad Panic
Keypad tamper
Mains fail
Low battery
Over current
Expander trouble
Log full
Autotest
Exit error
Recent close
Start program
End program
End download
Table 6 Event locations
Events Reported to
Phone
Openings and Closings
Partial
Zone Trouble
Power Fail, Low Battery,
Power
Bell Cut
Test Reports
Start and End
Programming
Zone and Box Tamper
Duress
Exit error
Keypad tamper
Keypad Panic
"B" Alarms
Unassigned
Unassigned
Table 7 Examples of message mappings
Specifications
Operating power
13.8 VDC supplied from CSx75
Operating
0 to 40° C / Relative humidity max. 93 %
temperature
Dimensions
57 mm wide * 100 mm high * 20 mm
deep
Shipping weight
150 g
7
Location
84
86
87
88
89
90
91
93
95
99
102
103
104
105
106
107
108
Communicator
Assigned
Codes
Message
69 and 70
Message 1
71
Message 2
76
Message 3
91 and 93
Message 4
80
Message 5
103
Message 6
107 and 108
Message 7
76 and 78
Message 8
86
Message 9
104
Message 10
90
Message 11
89
Message 12
73
Message 13
Message 14
Message 15
Publicité
