Unpacking; General Safety Regulations - CombiSteel 7489.5205 Mode D'emploi

1.4 UNPACKING

Remove all cardboard, wood or other materials from the wood base on which the machine is set. Lift the
machine/ components with suitable means (e.g. lift truck), remove the wood base then position the machine /
components in the allocated site.

Once all packing material has been removed, check that the machine has not been damaged in any
way.

Remove the protective PVC film on the stainless steel panels from all internal and external surfaces.

1.5 GENERAL SAFETY REGULATIONS

Failure to observe the recommendations made by the present manual will be at the entire responsibility of the
machine user. The main safety regulations are as follows:
• Do not touch the machine with moist or wet hands or feet;
• Never operate the machine while barefoot;
• do not insert screwdrivers, cooking utensils or any other object between the guards and moving parts;
• Before performing cleaning or routine maintenance operations, disconnect the machine from the power
supply at the master switch and the main knife switch (if present);
• Never pull on the power cable to disconnect the machine from the power supply.
THESE OPERATIONS MUST BE PERFORMED BY A CERTIFIED INSTALLATION TECHNICIAN ONLY.
13