Environment Preservation; Installation Instructions - Pando E-380 Notice D'utilisation

The control panel displays [ E2 ] :
•
The hob is overheated, let it cool and then turn it on again.
The control panel displays [ E8 ] :
• The air inlet of the ventilator is obstructed, release it.
The control panel displays [ U400 ] :
• The hob is not connected to the network. Check the connection and reconnect the hob.
The control panel displays [ Er47 ] :
•
The hob is not connected to the network. Check the connection and reconnect the hob.
If one of the symbols above persists, call the SAV.

ENVIRONMENT PRESERVATION

• The materials of packing are ecological and recyclable.
• The electronic appliances are composed of recyclable, and sometimes harmful materials
for the environment, but necessary to the good running and the safety of the appliance.
• Don't throw your appliance with the household refuses
• Get in touch with the waste collection centre of your
commune that is adapted
the household appliances.

INSTALLATION INSTRUCTIONS

The installation must be performed by a qualified electrical contractor.
How to stick the gasket:
The gasket supplied with the hob avoids all infiltration of liquids in the cabinet.
His installation has to be done carefully, in conformity of the following drawing.
Fitting - installing:
• The cut out sizes are:
CAUTION! Improper installation and failure to observe the
ventilations may lead to malfunction or breakdown of the
device that is not covered by the manufacturer's warranty.
to
edge of the glass, after removing
Model
E-380
18
the recycling of
Stick the gasket (2) two
millimeters from the external
the protection sheet (3).
Cut-size
750 x 490