Automatic Cooking; Recall Function - Pando E-380 Notice D'utilisation

•
Automatic stop at the end of the cooking time:
As soon as the selected cooking time is finished the timer displays blinking [ 000 ] and a sound
rings.
To stop the sound and the blinking, press the key [ - ] and [ + ].

Automatic cooking

All the cooking zones are equipped with an automatic cooking device. The cooking zone starts at
full power during a certain time, and then reduces automatically its power on the pre-selected
level.
• Start-up:
Action
Power level selection
(for example « 7 »)
• Switching off the automatic cooking:
Action
Power level selection
Stop&Go function
This function brakes all the hob's cooking activity temporarily and allows restarting with the same
settings.
• Start up/stop the pause function:
Action
Engage pause
Stop the pause

Recall Function

After switching off the hob (
• cooking stages of all cooking zones (Booster)
• minutes and seconds of programmed cooking zone-related timers
• Keep warm function
• Automatic cooking function
The recall procedure is following:
• Press the key [
• Then press pause key before the light stops blinking.
The previous settings are again active.
Control panel
slide on the "SLIDER" to [ 7 ]
and stay 3s
Control panel
slide on the "SLIDER"
Control panel
press key [ ]
press key [ ]
Press on the animated "slider"
), it is possible to recall the last settings.
]
12
Display
[ 7 ] is blinking with [ A ]
Display
[ 0 ] to [ 9 ]
Display
[ II ] and control light on
"Slider" animated
previous settings