Vacuum Package In A Canister; Use Of The Function "Pulse Vacuum - CASO DESIGN FastVac 1200 Mode D'emploi Original

16.3 Vacuum package in a Canister

Wipe canister cover, canister base and ensure they are clean and dry.
Put the items into the canister and do not fill up too full so that the cover can be in good
contact with the canister bowl rim. Close the cover.
Check the LED status of "vacuumstrengh" and make sure if it is in "normal" setting.
Close the lid and press down firmly on the front handle
Press the "Canister" button to start vacuuming. To ensure there is no air leaking between
the cover and the canister, use your hand to push down the cover at the beginning of the
vacuuming work. The machine will stop automatically when enough vacuum pressure is
achieved.
Take out the hose tube from the canister or bowl immediately first after the job is
completed.

16.4 Use of the function "Pulse Vacuum"

Since the pressure of the vacuuming becomes too strong for specific foods and these
could be crushed in the bag, you can adjust the length and strength of the vacuuming
process via the function "Pulse Vacuum". So you can adjust the vacuum strength to the
consistency of your vacuum food and also seal soft foods (for example berry fruit) without
crushing them. Due to the time and pressure control, the crushing of delicate foods is
prevented. You can also use this function for the packaging of juicy foods to prevent that
fluids are aspirated and drawn out.
1. Put the foods you want to store into the bag.
2. Clean and smooth the open end of the bag and be sure that there are no folds or waves
on the surfaces of the open ends.
3. Be sure that the open end of the bag is within the vacuum chamber seal. This
guarantees that there is no escape of the vacuum.
4. Close the lid and press down firmly on the front handle.
5. Press the button "Pulse Vacuum". As long as you press the button, air is withdrawn.
Only when you release the button, the process stops. Thus you can exactly control the
vacuum and prevent the liquid from being sucked. Please hold the button pressed until
the required vacuum has been reached.
6. Then press the button "Manual Seal" and seal the bag.
** Press the button "Cancel" to interrupt the process.
Insert one end of the hose into the hose port and another end
of the hose into the center hole of the canister cover.
.
43