Cleaning; Troubleshooting - CASO DESIGN FastVac 1200 Mode D'emploi Original

Attention
► Clean the unit after every use as soon as it has cooled. Leaving the unit uncleaned for
long periods can make it very difficult to remove leftover food and grime and may even
damage the unit.
► If moisture penetrates the unit's housing, it can damage the electronic components.
Please ensure that no moisture enters the device.
► Do not use any harsh or abrasive cleaning agents.
► Do not attempt to scrape off stubborn grime with hard or abrasive tools.
► Dry all parts thoroughly before using after cleaning.
► Do not immerse the unit in water or other liquid.

17.2 Cleaning

Outside of the unit


Wipe with a damp cloth or sponge and mild dish soap.
 Inside of the unit

Wipe away any food or liquids with a paper towel.
 Cleaning bags for reuse
 Wash the bags in warm water with a mild dishwashing soap, then rinse them well
and allow them to dry completely before reusing
DANGER
► Bags used to store raw meats, fish or greasy foods should never be reused due to risk
of contamination.
 Sealing profile (which presses the bag against the sealing bar)
Remove the sealing profile and clean it in warm soapy water.
► The sealing profile should be cleaned thoroughly before installing it again.
► Be careful during re-installation, so that nothing will be damaged and sealing profile is
placed well so that the device can work properly.

18 Troubleshooting

The following table may help you narrow down and address minor malfunctions:
Please note
.
45