Publicité
Les langues disponibles
Les langues disponibles
STEP 1 – ASSEMBLING THE MAIN FRAME
A Two people will be necessary at this point to assemble the trampoline. One person lifts
the Support Assembly from 6 to a standing position and inserts one of the sockets of the Top
Rail with Sockets (3) into the Vertical Leg Extension portion of the Support Assembly. The
other person holds the other end and inserts that portion into the other Support Assembly as
shown. You should now have 2 Support Assemblies held together by 1 Top Rail with Socket
B. Now, install the other 4 Top Rails(4) into Top Rail with Leg Sockets(3) the both ends
3B(X2)
4A
D.WARNING: Using the screw set connect to the frame as shown in diagram, In order repeat this
all. Ensure all nuts and bolts are securely tightened .And then you have to put the long nail
through the hole of the leg base into the ground Before you pull the spring
11
3A(X2)
4A
Long Nail
9 (x8)
GB
Publicité
