Parker M5AS Mode D'emploi page 15

Catalogue HY29-0037-M1/FR
conversions
3 . 1 . DeMonTAge / MonTAge
3 . 1 . d MonTAge :
11 . Install the new shaft seal
using the seal driver tool
(see page 31).
12 . Shaft assembling.
A : Assemble the bearing on
the shaft (push on the in-
ner bearing cage).
B : Place the shaft & bearing
assembly in the housing
(loose fit).
C : Insert the retaining ring into
the housing.
LUBRIFIER
AVEC
Moteurs hydrauliques, cylindrée fixe
M5AS - M5ASF, moteurs à palettes Denison
c
b
A
15
!
Press carefully to avoid
damaging the seal.
Don't use a hammer.
Gently push the shaft &
!
bearing assembly as to
avoid the destruction of the
shaft seal.
Parker Hannifin SAS
VPDE, Denison Vane Motors
Vierzon - France