GEZE TS 5000 L-E-ISM VPK Instructions De Montage page 13

TS 5000 L-E-ISM VPK
Install mounting plate with 2 x expanding rivet (3.).
X
Glue cable tie base (4.).
X
Lay platinum wire for electrical locking device GF (5.).
X
Connect platinum wire and electrical locking device GF with lustre terminals (6.).
X
à Red-white wire to red-white
à Red-blue wire to red-blue
Stow lustre terminals and cables in cover plate GF (7.).
X
Fix the cable with cable ties at the cable tie base (8.).
X
6.4 Connecting 24 V fixed-leaf cable
Red ='+'
White = '–'
Route 24 V fixed-leaf cable of electrical hold-open device to the supply terminal (1.).
X
Shorten excess cable.
X
Connect cable to terminal (2.).
X
6.5 24 V Mains connection
Place the mains cable provided on site on the terminal (1.).
X
Shorten excess cable.
X
Connect cable to terminal (2.).
X
Secure the 24V mains cable and the 24V fixed-leaf cable with a cable tie to the tie base (3.).
X
7.
8.
Mounting and fixing
Fig.: 6.3.2
Fig.: 6.4.1
Fig.: 6.5.1
GB 5