Fm Operation - auna Roadie DAB Mode D'emploi

FM OPERATION

SWITCHING FROM DAB TO FM MODE
To switch the unit to FM mode, press the DAB/FM button repeatedly to
select FM mode The display will show the frequency.
AUTO SCAN
Press and hold SELECT
station. To scan down the frequency band.
MANUAL SCAN
To search for FM stations manually, press the CHANNEL + or - buttons
repeatedly until your desired frequency is reached.
SCAN SETTING
This is a scanning option to scan all stations, or just scan stations with a
strong signal.
1. Press the MENU button, then press the CHANNEL + or -buttons to select
"Scan setting". Press the SELECT button to confirm.
2. Press the CHANNEL + or - buttons to select "All stations" or "Strong
stations only". Press the SELECT button to confirm.
AUDIO SETTING
This unit will automatically switch between stereo and mono mode, but
you can override this and switch this function manually. This can be helpful
when receiving poor signal reception.
1. Press the MENU button, then press thebuttons to select "Audio setting".
Press the SELECT button to confirm.
2. Press thebuttons to select "Stereo allowed" or "Forced mono" and then
press the SELECT button to confirm.
AUDIO MODE
Press the MONO/STEREO button to toggle between the Stereo or Mono
modes.
PRESET STATIONS
You can store up to 20 of your favourite stations to the memory. This will
enable you to access your favourite stations quickly and easily.
PRESET STATIONS
1. Press and hold the PRESET button. The display will show "<Store to P#>".
2. Press the CHANNEL + or - buttons to select your desired preset station
 button until the tuner starts searching for a

EN
35