Power Sources - auna Roadie DAB Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

EN
30

POWER SOURCES

This unit operates on AC 230V~ 50Hz or 6 pieces of 1.5V "C" (UM-2)
batteries. Do not attempt to operate the radio on any other power source.
You could cause damage to the unit and void your warranty.
Please be sure the power outlet you plug this unit into is working and 
receives constant (unswitched) power.
BATTERY OPERATION
1. Remove the Battery Door.
2. Install 6 x DC1.5V "C" (UM-2) batteries (not included) according to the
polarity diagram inside the battery compartment.
IMPORTANT: Be sure that the batteries are installed correctly. Wrong
polarity may damage the unit.
3. Close the Battery Door.
Note: For best performance, alkaline-type batteries are recommended.
BATTERY REPLACEMENT
When the output sound of this unit becomes distorted or the CD player
operation appears unstable, the batteries are weak. You need to replace 
all the exhausted batteries at the same time as soon as possible to avoid
battery leakage.
AC OPERATION
Plug the detachable AC cord A into a standard AC outlet (230V~50Hz).
1. When the AC power cord (included) is connected to the AC Power Socket 
on the back of the unit and the other end is plugged into a 230V AC~ 
50Hz wall outlet, the unit will disconnect the batteries automatically, and
operate on AC Power only.
2. Slide the FUNCTION SWITCH to "CD/USB" for CD or USB play, "FM" for
FM radio, "BT/AUX" for BT or AUX play and "OFF" for unit power off.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

1003205910032060

Table des Matières