System Startup - GE AF-600 FP Guide Rapide

Start Up and Functional Tes...
4.7 System Start Up
The procedure in this section requires user-wiring and
application programming to be completed. is intended to
help with this task. The following procedure is
recommended after application set-up by the user is
completed.
CAUTION
MOTOR START!
Ensure that the motor, system, and any attached
equipment is ready for start. It is the responsibility of the
user to ensure safe operation under any operational
condition. Failure to ensure that the motor, system, and
any attached equipment is ready for start could result in
personal injury or equipment damage.
1. Press [Auto].
2. Ensure that external control functions are
properly wired to the drive and all programming
completed.
3. Apply an external run command.
4. Adjust the speed reference throughout the speed
range.
5. Remove the external run command.
6. Note any problems.
If warnings or alarms occur, see 7 Warnings and Alarms.
AF-600 FP Quick Guide
DET-759A
4 4
17