Cpr Function; Pressure Range Selection - Drive PreserveTech 14200N Manuel De L'utilisateur

OPERATION
Note
For suitable pressure, please refer to page 14 for the hand check procedure.

CPR function

When there is an emergency requirement to perform CPR on the patient, remove the quick connector at
the left-hand side of the control unit to release the air quickly from the mattress.

Pressure range selection (+/-)

Users can adjust the pressure level of the air mattress, using the (+) and (-) buttons, to a desired firmness
based on personal comfort or weight setting.
Note
This system will automatically default to auto firm when the mattress is first inflated. Users can then easily
adjust the air mattress to a desired firmness according to the patient's weight and comfort.
Low pressure indicator
When the air pressure in the system falls below the selected pressure range, a low-pressure condition will
signal the low-pressure indicator. Check if the connections are secure and correctly installed according to
the relevant instructions.
Note
If the pressure is consistently low, open the zipper and confirm that all the hoses are properly connected.
Then check for any noticeable leakage in any of the tubes. If necessary, contact your local dealer to
replace any damaged tubes or hoses.
13