Control Unit - Drive PreserveTech 14200N Manuel De L'utilisateur

PRODUCT FUNCTION
• The cell material, PU/Nylon blend, provides a specialty surface that conforms to the specific shape of the
patient, minimizing soft tissue distortion, reducing bone penetration into muscle fascia, and promoting
improved blow flow compared to traditional surfaces.
.
Warning
For important precautions, see pages three and four
Caution
Do not place the control unit on the floor. Position the power cord to prevent tripping hazards.
1) Remove all existing covers and sheets from mattress on bed.
2) Unpack the Harmony, tri-therapy mattress replacement system and inspect all components for damage.
Do NOT use the system if any component is damaged.
3) Confirm there are no sharp objects in the immediate area which may risk damage to the Mattress.
4) Position the Lateral Rotation Mattress Replacement on
top of bed, printed top cover facing upwards and
air hoses towards the foot end of the bed.
5) Secure the therapy mattress to the movable parts of the
bed frame or bed deck. Ensure buckles are securely
fastened and straps are pulled tightly.
DO NOT SECURE TO THE SIDE RAILS - STRAPS
WILL TEAR OFF.
CPR deflation valve
• Remove the quick connector on the left side of control unit to release the air
immediately from the mattress for rapid deflation. Deflation time varies depending
on patient weight and profile..
Quick Connector
• Used to connect the therapy mattress to the control unit.
5)
10