Advanced Commands: (Levels 1 - 2); Aux 1 (Sliding Door*); Aux 2 (Sliding Door*); Valet Mode - Python 952 Guide D'installation

Advanced Commands: (Levels 1 - 2)

Press and release the
indicated below. The
and LED illuminated indicates level 2.
AUX

AUX 1 (Sliding Door*)

Press
one time and then press

AUX 2 (Sliding Door*)

Press
two times and then press
Activates (or if On, deactivates) the Aux 1 or 2 output respectively. The
Aux LED and On tones or Off tones play to confirm.
Note: These are optional features. See your authorized Directed deal-
er for details.

Valet Mode

Press
two times and then press
Enters or exits Valet mode, even if locked. When entering Valet mode
the remote beeps once and twice when exiting (See Valet Mode sec-
tion.

Timer Mode

Press
two times and then press
Remote start LED turns on, with 1 beep when enabled and 2 beeps
for disabled. Enables or disables the remote start timer mode (see
Remote Start section).
* Only if vehicle is equipped.
6
button the corresponding amount of times
LED illuminated indicates level 1. The
AUX
AUX
© 2009 Directed Electronics. All rights reserved.
LED