Night Mode; Settings; Settings Depending On The Heating Circuit - OEG CPA-E Serie Mode D'emploi

40
6. Control panel

6.5. Night mode

The night mode can be activated/deactivated by pressing the night
mode key. A little light indicates when the night mode is on. The
night mode can only be activated if the system is prepared for night
mode. In default setting the night mode is off.
Note

7. Settings

7.1. Settings depending on the heating circuit

Default setting = AUTO (self-adapting mode)
High-efficiency heating and solar circulation pumps
GB
The night mode cannot be activated if the pump is
running with constant speed I, II and III or being
controlled by a PWM signal.
CPA-E and CPA-E S PWM series