Control Panel; Display And Operating Elements On The Control Panel; Indication Of Energy Consumption And Errors - OEG CPA-E Serie Mode D'emploi

38

6. Control panel

6.1. Display and operating elements on the control panel

6.2. Indication of energy consumption and errors

The display (position 2) lights up as soon as the pump is connected
to the power supply and indicates the actually consumed power. In
case of an error one of the error codes listed below will be indicated.
Error code E0: Overvoltage protection
Error code E1: Undervoltage protection
Error code E2: Overcurrent protection
Error code E3: Undercurrent protection
E2 E4: Open phase protection
High-efficiency heating and solar circulation pumps
GB
CPA-E and CPA-E S PWM series
1. Display of the night mode and on/off
key for night mode
2. Display of the currently used power
in Watt
3. Display of the operating mode
4. Display of the signal input (PWM)
5. Key for setting the operating mode