30
CPA-E and CPA-E S PWM series
2. General information
2.1. CPA-E and CPA-E S series
Heating and solar cicuculation pumps of this series are mainly used
in domestic heating and solar systems.
The pumps are equipped with permanent-magnet motos and
differential pressure controller which are able to automatically and
continuously adapt the motor performance to the actual system
requirements.
2.2. Advantages
Easy installation and operation
The default setting of the pump is an auto-adaptive mode. In most
cases it is not necessary to adapt the pump further. Operation is
automatically adapted to the detected system parameters. If
however necessary pump settings can be easily changed by means
of the terminal box on the side of the pumps.
Low noise
The operating noise of the pumps is very low.
Low power consumption
The power consumption is
extremely low compared with
conventional, uncontrolled
circulation pumps.
All CPA-E pumps have
energy efficiency class A.
High-efficiency heating and solar circulation pumps
GB