Nidec Unidrive M400 Guide D'utilisation Pas À Pas page 8

STEP 11: Use the keypad
The display provides information to the user regarding the operating status of the drive, alarms and trip code.
The keypad provides the means for changing parameters, stopping and starting the drive, and the ability to perform
a drive reset.
5
3
2
Status
Mode
Parameter
View Mode
8
(1) The Enter button is used to enter parameter view or edit
(2) The Navigation buttons can be used to select individual
(3) The Start button (green) is used to start the drive in keypad
1
(4) The Stop / Reset button (red) is used to stop and reset the
4
(5) The Escape button is used to exit from the parameter edit /
To enter Parameter View mode,
press button or
To select parameter press
To enter Edit Mode,
button
press
Edit Mode (Character to be edited in
lower line of display flashing)
Change parameter values by pressing
mode, or to accept a parameter edit.
parameters or to edit parameter values. In keypad mode,
the 'Up' and 'Down' keys are also used to increase or
decrease the motor speed.
mode.
drive in keypad mode. It can also be used to reset the drive in
terminal mode.
view mode or disregard a parameter edit.
Timeout
To return to status mode,
or press
Press
button
When returning
to Parameter
View Mode
use the
buttons to
select another
parameter to
change if
required
To return to Parameter View Mode,
Press
button to keep the new value
Press button to ignore new value
return the parameter to the pre-editied value
buttons
Unidrive M400 Step By Step Guide
Timeout
button
Issue Number: 2