Nidec Unidrive M400 Guide D'utilisation Pas À Pas page 6

Table 7-1 Recommended torque settings
Model size
All
1
2, 3, 4
All
STEP 8: Fitting optional keypad and display
Figure 8-1 Fitting the CI-Keypad to the drive
1. Align the CI-Keypad with the keypad housing on the drive.
2. Slide the keypad along the provided channels until the keypad slots into place.
6
Terminal block description
Control terminals
Relay terminals
Power terminals
Ground terminals
Torque settings
0.2 N m (0.15 Ib ft)
0.5 N m (0.37 Ib ft)
0.5 N m (0.37 Ib ft)
1.4 N m (1.03 Ib ft)
1.5 N m (1.10 Ib ft)
Unidrive M400 Step By Step Guide
Issue Number: 2