Installing A Carbon Filter (Optional) - Klarstein AURICA Mode D'emploi

INSTALLING A CARBON FILTER (OPTIONAL)

1
Activated carbon filter can be used to
trap odours.
2
In order to install the activated
carbon filter, the grease filter should
be detached first. Press the lock and
pull it downward.
3
Plug the activated carbon filter into
the unit and turn it in clockwise
direction. Repeat the same on the
other side. Make sure the filter is
securely locked. Otherwise, it would
loosen and cause dangerous. When
activated carbon filter attached, the
suction power will be lower.
EN
25