Installation Of The Carbon Filter - Klarstein HOTSPOT Mode D'emploi

Method 2:
If instructed to do so, it can be put into a dishwasher, set the temperature at
around 60 degrees.
Cleaning the cooker hood
• To protect the main body from corrosion over a long period of time, the
cooker hood should be cleaned with hot water plus non corrosive detergent
every two months.
• Please do not use abrasive detergent for it will damage the body.
• Keep the motor and other spare parts free from water, as this will cause
damage to the appliance.
• Before cleaning the appliance please remember to cut off power
• The carbon filter shouldn't be exposed to heat.
• Please don't tear open the fixed bar around the carbon filter.
• If the plug or cord is damaged, please replace it with special soft cord.

Installation of the carbon filter

Remove the grease filters. The charcoal filters are located at both end of the
motor. Turn the charcoal filters until they are unscrewed. The carbon filters should
be replaced every 3-6 months or if they show signs of damage.
open
close
EN
19