Installing The Carbon Filter; Cleaning And Care - Klarstein 10033777 Mode D'emploi

EN
22

INSTALLING THE CARBON FILTER

Note: An activated carbon filter is not included. But you can buy it as an extractor
hood (item number: 10030983).
1
Activated carbon filter can be used to
trap odours.

CLEANING AND CARE

Monthly Cleaning for Grease Filter
Clean the filter every month can prevent any risk of fire. The filter collects grease,
smoke and dust, so the filter is directly affecting the efficiency of the cooker hood. If not
cleaned, the grease residue (potential flammable) will saturate on the filter. Clean it with
household cleaning detergent.
2
In order to install the activated carbon
filter, the grease filter should be
detached first. Press the lock and pull it
downward.
3
Plug the activated carbon filter into the
unit and turn it in clockwise direction.
Repeat the same on the other side.
Make sure the filter is securely locked.
Otherwise, it would loosen and cause
dangerous. When activated carbon
filter attached, the suction power will
be lower.