Station Preset Memory; Auto Memory Entry; Preset Tuning; Crsc (Clean Reception System Circuit) - Kenwood KDC-1028 Mode D'emploi

Station Preset Memory

Putting the station in the memory.
1
Select the band
Push the Control knob to [FM] or [AM].
2
Select the frequency to put in the memory
Push the Control knob to [4] or [¢].
3
Put the frequency in the memory
Press the desired [1] — [6] button for at least
2 seconds.
The preset number display blinks 1 time.
On each band, 1 station can be put in the
memory on each [1] — [6] button.

Auto Memory Entry

Putting stations with good reception in the
memory automatically.
1
Select the band for Auto Memory Entry
Push the control knob to [FM] or [AM].
2
Open Auto Memory Entry
Press the Control knob for at least 2 seconds.
When 6 stations that can be received are put in
the memory Auto Memory Entry closes.

Preset Tuning

Calling up the stations in the memory.
1
Select the band
Push the Control knob to [FM] or [AM].
2
Call up the station
Press the desired [1] — [6] button.
CRSC (Clean Reception System
Circuit)
Temporarily have reception switched from
stereo to mono to reduce multi-path noise when
listening to the FM station.
Press the [CRSC] button for at least 1 second.
Each time the button is pressed, CRSC turns ON
and OFF.
When it's ON, "on CRSC" is displayed.
| 13
English