Listening To The Radio; Station Preset Memory - Kenwood KDC-X895 Guide De Démarrage Rapide

Listening to the radio

[SRC]
Selecting a tuner source
Press the [SRC] button to select "TUNER".
Selecting the band
Push the Control knob towards down to
change the band (FM or AM).
Selecting a station
Push the Control knob leftward and
rightward to select the station you want
to listen to.
The tuning mode can be changed. Refer
to <Seek mode setting> (page 18) of
Instruction manual

Station preset memory


Push the Control knob towards down to
change the band (FM or AM).

Push the Control knob leftward and
rightward to select the station you want
to memory.

Press the [PRESET] button.
Press the [PRESET] button again to enter
the Mix Station preset mode. In this
mode, different bands and tuner sources
(Radio, Sirius, XM etc.) can be saved in
the same preset layer, which allows you
to recall the desired station without
switching the bands or tuner sources.
Maximum of 6 stations can be preset in
the Mix Station preset mode.

Turn the Control knob to select preset
Control knob [PRESET]
number (FM: "01" – "18", AM: "01" – "06"),
and then press the Control knob for at
least 2 seconds.
Recalling the stations in the
memory

Push the Control knob towards down to
change the band (FM or AM).

Press the [PRESET] button.

Turn the Control knob to select preset
number (FM: "01" – "18", AM: "01" – "06"),
and then press the Control knob.
English | 7