Instructions For Use; Filling The Jacket; Details Regarding The Operation Of The Pressure Kettles - Tecnoinox 900 Serie Manuel D'installation, D'entretien Et D'emploi

Before cooking with the appliance for the first time, wash the interior of the cooking vat thoroughly.
Warning! : Fill the cooking vat up to a maximum of 40 mm under the overflow border, according
to the maximum level mark, including the food to be cooked.
Warning! : Before filling the vat, always check that the drainage tap is closed.
Warning! : The water level in the jacket must be checked each time before lighting.
Warning! : It is advisable to use softened water to fill the jacket!
Unscrew the filling cap on the safety valve unit. The latter is on the right of the appliance surface (see
figure "Size of appliance and position of connections ").
Fill with softened water (the capacity of the jacket is stated in the paragraph "Technical data").
Check the water level by looking through the hole on the left of the front panel of the appliance.
Screw back on the cap of the safety device.
3.2.2. DETAILS REGARDING OPERATION WITH PRESSURE KETTLE
Before turning the appliance on, close the lid firmly and lock the 4 screw clamps.
Check that the valve is in a resting position.
Start cooking at full power. When steam starts to come out of the valve, reduce heating power. The
steam coming out of the valve must be constant and light.
The pressure inside the cooking vat can reach a maximum of 0.05 bar. On request, the appliance can be
equipped with a pressure gauge that shows the pressure inside the cooking vat.
Turn off the appliance after cooking.
Before opening the lid, release all the pressure from the cooking vat by lifting the relief valve lever (see
figure "Controls").
Check that the valve lever is still "On" and unscrew the screw clamps.
Manuale d‟istruzione per l‟installazione, la manutenzione e l‟uso
Pentole elettriche Serie 900

3.2. INSTRUCTIONS FOR USE

3.2.1. FILLING THE JACKET

05.11.01 - IT pagina 39