NSK Ti-Max Z Z10L Manuel D'utilisation page 16

Chuck cleaning (Z84L / Z85L / Z85 / Z95L / Z95)
Clean the Push Button chuck once a week.
1) Mount the Tip Nozzle onto the spray can port.
2) Lubricate the chuck directly where the bur is inserted (Fig. 10).
3) Lubricate handpiece by using NSK PANA SPRAY Plus / PANA SPRAY (Fig. 7) or NSK automatic handpiece
cleaning and lubrication system.
CAUTION
If the chuck is not regularly cleaned the chuck grip may be weakened and the bur may be accidentally released during use.
14
Bur Insertion Hole
Tip Nozzle
Fig. 10