Festo VTSA Manuel De L'utilisateur page 17

1 User
Valve terminal type VTSA−ASI−...−8E8A−Z has been de
signed exclusively for controlling pneumatic actuators and
is only suitable for use in bus systems in accordance with
the AS−Interface specifications. If additional commercially−
available components are connected, the specified limits
for pressures, temperatures, electrical data, torques, etc.
must not be exceeded.
The valve terminal enables the control of 8 valve solenoid
coils and the registering of 8 sensors. The exchangeable
connections of the CPX system are used for connecting the
sensors.
AS−Interface bus systems and valve terminals may only be
installed by personnel especially trained for this purpose.
Specifications on the design and addressing of your bus
system can be found in the manual for the AS−Interface
master.
Detailed information on the pneumatic components of the
valve terminal can be found in the Pneumatics manual type
P.BE−VTSA−...
Caution
S Switch off the power supply before connecting or
disconnecting plugs (otherwise this could lead to
functional damage).
S Commission only a valve terminal which has been
fitted and wired completely.
S Connect the earthing cable between the adapter
module and the multipin node.
Festo VTSA−ASI−...−8E8A−Z 0802NH English
instructionsEnglish
17